Anti Vibration Mounts

Easyflex Type EFRO mounts are very versatile and can be ideal for a wide range of applications where simple and compact anti-vibration mountings are required. They are suitable for loads in shear, as well as in compression. These mounts are used in an extensive range of applications including compressors, generators, air conditioners, pumps, fans, motors, laboratory equipment, scales, etc.

Type 'EFRO' mounts are comprised of an elastomer bonded between two metal plates. The dynamic and static properties of the unit are determined by the composition and configuration of the elastomer. High strength bonds are specially compounded elastomers provide high load carrying capacity and assures long life.

Simplicity of design and unitized construction provide low cost mounting systems which are compact, light-weight, easy to install and maintenance free.

EFTM rubber mountings are designed to provide superior attenuation of medium to high frequency vibration and noise emanating from a wide range of motor driven machines particularly axial and centrifugal fans. High resilence rubber with low dynamic to static stiffness ratio ensures maximum efficiency, good creep performance and long service life.

Features:

• Fail Safe Design
• Built – in protection when the equipment is lifted
• Rugged Construction

The Easy Mount assembly consists of base and cover into which are a pair of rubber to metal bonded flexible units sandwiched in an angular disposition. These are loaded in a combination of shear and compression for longest life and best load /deflection characteristics. Besides the desired vertical flexibility, easy mounts are stiffer in the transverse direction as compared to flexibility in the horizontal direction. Full advantage of this characteristic is taken by disposing the mountings so that the greater flexibility is available in the direction in which it is needed. When three or more mountings are arranged symmetrically around a vertical axis, the flexibility of the suspension is the same in all direction. Such an arrangement is very useful for centrifuges, washing machines and other machinery revolving about a vertical axis.

The mountings are designed to protect the rubber inserts from oil and physical damage. A levelling device can also be provided for machines requiring precision leveling. The pads are made in oil resisting rubber and can be used on all kinds of floor. The rubber friction pad provided at the bottom obviates the necessity of bolting the machine to floor. Easy Mounts can be conveniently arranged in tandem for doubling deflection for very low frequency vibrations.

The anti-vibration wall braces EFWB are used in order to add structural integrity of long and tall gypsum board walls, which are mounted on anti-vibration pads or based on floating floor. They avoid any direct connection between the double walls, and increase their stiffness. They prevent wall backward motion during earthquakes. It is used where a secondary wall is installed for improved sound insulation.

EFWB consists of a metal frame, suitable reinforced and modulated. Two special anti-vibration elastic support, EFWB is placed internally to absorb positive and negative axial forces. EFWB are not to be used for vertical support.

“Easy Flex" Level Mounts for Vibration/Shock/Noise Isolation

Features

• Resilient rubber grommet mount with steel load distribution cups and extended sleeve, designed to reduce transmission of structure born noise from air ducts and suspended equipments / small pipes.
• Supplied complete with top and bottom steel load distribution cups, electro-galvanised after manufacture for maximum corrosion resistance.
• Extended sleeve of rubber element prevents metal to metal contact between suspension rod and suspension bracket / trapeze channel.
• Available in two different sizes to suit width of duct / equipment suspension channel.

We re offering Jack-Up Mount to our clients.